1200Mbps Dual Bands 4G LTE Wireless Router MTK7628NN Chipset

Zbtlink WE5927-C is a 4G routing product for home used. It accesses the Internet through 4G mobile communication dial-up or 100Mbps WAN port dial-up, and then shares the wireless WiFi and internet network to user or device.

details

1200Mbps 2.4G 5.8G Dual Bands 4G LTE Wireless ZBT-WE5927-A is a 4G routing product for home used. It accesses the Internet through 4G mobile communication dial-up or 100Mbps WAN port dial-up, and then shares the wireless WiFi and internet network to user or device.

And also,it can be supported wired Ethernet .Customers can be connected WAN port by wired Ethernet cable to share wireless WiFi and wired network to user or device.

Selling point

● Adopt MT7628NN chipset,MIPS24KEc architecture CPU,main frequency is up to 580MHZ

● Support 2.4G, rated up to 300Mbps

● Support 802.11 N/G/B protocols.

● MT7628NN chipset integrates 64MB DDR2, match with 8MB Nor Flash

● 1*WAN and 3*LAN 100Mbps adaptive network port, support automatic flip(Auto MDI/MDIX)

● Support "one-click flash mode",Long press the reset button to boot and then will enter the rescue flash mode

● Built-internal 4G module to support 3G&4G function,

● One standard SIM card slot, support SIM/USIM card

● External high gain omnidirectional antenna with 360o wireless signal

● This product supports hardware watchdog function, when the routing system fails, it will restart the device automatically.

Hardware watchdog function introduction
This hardware product has designed the hardware watchdog function. The hardware watchdog will automatically turn on after power on.And detect the heartbeat level output by the routing system once every 1 second. If the routing system itself fails (such as a crash), it will not be able to output the heartbeat level. At this time, if the hardware watchdog has not detected a heartbeat within 120 seconds Level, it will automatically shut down, restart the entire system in 15 seconds.
The routing system can independently control the power supply of each 4G module. When the routing system detects any module dialing failure, it will automatically power off the failed 4G module, and then power on again to restart the 4G module.
4G mobile communication function
This product has been SMT one 4G module to support 4G mobile communication functions. Adapter USB2.0 bus. Changing different 4G modules can support the 4G frequency bands of different countries. For more detailed 4G functions, please contact Zhibotong customer service, and refer to the specification of 4G module .

Hardware interface introduction

Network port1*WAN,100Mbps support automatic flipAuto MDI/MDIX
IEEE 802.3/802.3u,802.11n/g/b
3*LAN,100Mbpssupport automatic flipAuto MDI/MDIX
IEEE 802.3/802.3u,802.11n/g/b
SIM card slot1*SIM slotsupport SIM/USIM,1*SD card slot.
PowerDC5.0*2.1MM port
Reset button1* reset button
Antenna2*2.4G & 5dbi external Omnidirectional antennas
2*4G 5dbi internal Omnidirectional antennas
4G module interfaceIt is directly SMT LCC+LGA 4G module to support 3G&4G function.

Indicator light introduction

WAN  LEDConnect to the Internet port, the indicator will be always light, and it will flash when there is data communication, the network port with LED
LAN1  LEDConnect to the Internet port, the indicator will be always light, and it will flash when there is data communication, the network port with LED
LAN2  LEDConnect to the Internet port, the indicator will be always light, and it will flash when there is data communication, the network port with LED
LAN3  LEDConnect to the Internet port, the indicator will be always light, and it will flash when there is data communication, the network port with LED
2.4G WIFI LEDTurn on 2.4G WIFI function,the indicator will be always light, and it will flashes when there is data communication, Turn off 2.4G WIFI or 2.4G WIFI function fails, the indicator will be off. The first light on the left side of the upper row
4G  LEDFast flashing (on and off once in 600ms):No SIM card or network registration failed
Slow flashing (once at 3000ms and off once at 75ms):Standby mode
Fast flashing (on and off once in 75ms):Dialing is normal, data link is established
Constant light:Sleep state
Power LEDIt is always on when the power is connecting, and it will be off  when the power supply is faulty or is not connected to the power.,The first light on the left side of the below row

Hardware platform introduction

This hardware product has designed the hardware watchdog function. The hardware watchdog will automatically turn on after power on.And detect the heartbeat level output by the routing system once every 1 second. If the routing system itself fails (such as a crash), it will not be able to output the heartbeat level. At this time, if the hardware watchdog has not detected a heartbeat within 120 seconds Level, it will automatically shut down, restart the entire system in 15 seconds.
The routing system can independently control the power supply of each 4G module. When the routing system detects any module dialing failure, it will automatically power off the failed 4G module, and then power on again to restart the 4G module.

4G mobile communication function

This product has been SMT one 4G module to support 4G mobile communication functions. Adapter USB2.0 bus. Changing different 4G modules can support the 4G frequency bands of different countries. For more detailed 4G functions, please contact Zhibotong customer service, and refer to the specification of 4G module .

Description of power supply and power consumption


Test ConditionsMin ValueRated valueMax ValueUnit
Working VoltageT A = 25°C61214V
Absolute working voltageT A = 25°C5.5
16V
Working currentVIN=12VT A = 25°C0.40.61A

WIFI Wireless parameter introduction

Compatible with IEEE 802.11 b/g/n, support IEEE 802.11 d/h/k; support 20MHz, 40MHz, using 2T2R MIMO antenna technology, the maximum connection rate is up to 300Mbps. The following is a description of the transmission power of 2.4G WIFI , reception sensitivity, and power frequency .

Introduction of structural parameters and accessories

WeightKG1.02KG
SizeL*W*H=168.61*129.02*17.94mm
ColorGray
Including partsPower adapter12V/1 1PCS
Instructions1PCS
Certificate of conformity1PCS
Net cable1PCS
Antenna2.4G  external antennas 2PCS
4G external 5DB antennas 2PCS inside of router

Product working environment requirements

Working temperature-0℃ to 40℃
Storage temperature-40℃to 70℃
Working humidity10% to 90%RH Non-condensing
Storage temperature 5% to 90%RH Non-condensing

Software configuration information

Default IP192.168.1.1
Username/ Passwordroot/admin
2.4G SSIDWIFI-XXXXXX (X is the last 6 digits of the MAC address)No password by default


The above is the general default preparation information of the product. The WIFI SSID may be different when using our OS firmware or OPENWRT firmware, but the default IP , WEB login name and password of this product remain unchanged. For other detailed software functions, please refer to the product description.






TAGS

RELATED PRODUCTS