Hot Model Z2101AX MTk7621A Chipset wifi6 5G wireless router with 1800Mbps Dual bands 1000Mbps Ethernet Ports

Model: Z2101AX-D Product name: Wifi6 5G Router WAN Port: 1*10/10/1000M Port LAN Ports: 3*10/10/1000M Ports RAM: 256MB Flash: 16MB Support: OEM ODM Industrial Router Warranty: 1 Year

details


1.Quick Details
Product name: Wifi6 5G Router
Model: A2101AX-D
Chipset: MTK7621A, MIPS dual-core CPU, the main frequency is up to 880MHZ
RAM: 256MB
Flash: 16MB
Max. LAN and WAN Data Rate: 1000Mbps
With Modem Function: No
Standards And Protocols: IEEE802.11ax, IEEE802.11ac, IEEE802.11g, IEEE802.11b, IEEE802.11n
Wi-Fi Supported Frequency: 2.4Ghz & 5.8Ghz
Wi-Fi Transmission Standard: WiFi 802.11 ax
2.4G Wi-Fi Transmission Rate: 600 Mbps
5.8G Wi-Fi Transmission Rate: 1200 Mbps
Encryption Type: WPA-PSK
Function: FireWall, QoS, VPN
LAN Ports: 3*10/10/1000M Ports
WAN Ports: 1*10/10/1000M Ports
Brand Name: OEM
Place of Origin: Guangdong, China
Antennas: 2*5dBi 2.4Ghz  Antennas, 2*5dBi 5.8Ghz  Antennas, 4*5G antennas
Support: OEM ODM Industrial Router
Warranty: 1 Year

2.Selling Points
●Using MT7621A scheme, MIPS dual-core CPU, the main frequency is up to 880MHZ
●Using independent WIFI6 chip, MT7905D and MT7975D, the rate is up to 1800Mbps
●Using high-speed 256MB DDR3, with 16MB Nor Flash
●1WAN+3LAN 1000M adaptive network port, support auto flip (Auto MDI/MDIX)..
●Support "one-key flashing mode", that is, long press the reset button to enter the rescue flashing mode...
●Built-in M.2/Mini-PCIE standard interface (choose one of the two), which can be used to connect to 5G/4G mobile communication modules
●External standard SIM card (large card) interface and built-in eSIM (QFN-8 6mmx5mm) card interface, support SIM/USIM card

External high-gain WIFI antenna, wireless signal 360 degrees without dead angle


3.5G/4G mobile communication function

This product has a built-in M.2/MiniPCIE interface, which can be used to expand 5G/4G mobile communication functions. The built-in M.2/PCIE interface supports USB3.0 and USB 2.0 buses. 5G mobile communication supports NSA or SA, and which frequency bands are specifically supported by the selected 5G module. At present, this product has completed the joint debugging with Fibocom's FM150 series modules.


Hardware interface introduction

ProcessorMT7621A  MIPS Dual Core CPU, 880MHZ main frequency
WIFI chipsetMT7905D+MT7975D  IEEE 802.11n/g/b/a/ac/ax, max speed up to 1800Mbps
RAMDDR3 256MB
FlashNor Flash 16MB
NAND Flash
PortsWAN* 1, 1000Mbps(Auto MDI/MDIX)

IEEE 802.3/802.3u/802.ab

LAN*3, 1000Mbps(Auto MDI/MDIX)

IEEE 802.3/802.3u/802.ab
SIM slotSpring type SIM slot*1, QFN-8(6mmx5mm) eSIM*1, Support SIM/USIM
Power adapterDC5.0*2.1MM slot
ButtonReset button* 1, MESH button*1
AntennasOnmidirectional External 5dbi 2.4G antennas*2
Onmidirectional External 5dbi 5.8G antennas*2
Onmidirectional External 5dbi 5G/4G antennas(5G antennas* 4, 4G antennas*2)
MESH  LED1. The red light is on during the boot process, the boot is complete, the red light is off and the green light is on
2. Press the mesh button to enter the mesh pairing state, the green light flashes once a second, and the other lights are off
3. The main equipment network is normal, the green light and blue light are on at the same time (cyan)
The slave device MESH is successfully connected, and the distance is longer, the green light and the red light are on at the same time (orange), the distance is suitable for the green light and the blue light is on at the same time (cyan)
WAN  LEDWhen connecting the WAN ports, the LED light will be always on, and the LED will be flashing when there is data communication
LAN1  LEDWhen connecting the LAN ports, the LED light will be always on, and the LED will be flashing when there is data communication
LAN2  LEDWhen connecting the LAN ports, the LED light will be always on, and the LED will be flashing when there is data communication
LAN3  LEDWhen connecting the LAN ports, the LED light will be always on, and the LED will be flashing when there is data communication
4G/5G LEDWhen insert SIM card, the LED light will be always on, and the LED will be flashing when there is data communication
POWR LEDwhen the power supply is normal, the power indicator is always on, and it wont be on when the power supply is abnormal.






TAGS

RELATED PRODUCTS